Installati�N (Dln�6390�7) - JUKI DLN-6390 Manual De Instrucciones

#. INSTALLATI�N (DLN�6390�7)
Ths tem s appled only to the case where DLN-6390-7 s used.
WARNING :
• To prevent personal injury caused by abrupt start of the sewing machine� carry out the work after turning
��� the power switch and a lapse of 5 minutes or more.
• To prevent damage of device caused by maloperation and wrong specifications, be sure to connect all the
corresponding connectors to the specified places.
• To prevent personal injury caused by maloperation� be sure to lock the connector with lock.
• As for the details of handling respective devices� read carefully the Instruction Manuals supplied with the
devices before handling the devices.
1. Installing and settIng of SC�921
Install the motor and SC-92 referrng to the Instructon Manual for SC-92.
For the V-belt and the motor pulley, use those suppled wth the sewng machne.
To use SC-92 wth DLN-6390-7, t s necessary to set the followngs after set-up of SC-92.
3 4
3 4
3 4
8
5
6
5
6
5
6
) Refer to "#-6 Settng for functons of
SC-92" n the INSTRUCTION MANUAL
for SC-92, and call the functon settng
No. 95.
2) The type of machne head can be selected
by pressng swtch 5 (
* Refer to the "Lst of machne heads" on
the separate sheet or the Instructon Man-
ual for the machne head of your sewng
machne for the type of the machne head.
3) After selectng the type of machne head,
by pressng swtch 3 (
4 ), the step proceeds to 96 or 94, and
the dsplay automatcally changes to the
contents of the settng correspondng wth
the type of machne head.
swtch 6 ).
swtch