Stryker 4100-000-000 Instrucciones De Uso página 5

EN
1/4" Keyless Drill Chuck (REF 4100-133-000)
Handles wires, pins, and drill bits up to 1/4 in.
(6.4 mm) diameter.
Operating Instructions
Cutting Accessory Insertion
WARNING: You must manually close the chuck jaws to secure the accessory. Operating the
handpiece to automatically close the jaws on the accessory may result in injury to the user.
1. Open the chuck jaws by holding the attachment with the knurled ring in one hand and turning the collar
with the other hand.
2. Insert the cutting accessory and make certain it is centered in the jaws.
3. Close the jaws by holding the collar and turning the knurled ring until tight.
4. Tug the cutting accessory to ensure it is secure.
5. Visually verify that the cutting accessory is centered in the jaws.
6. Install the attachment in the handpiece.
4
1/8" Keyless Drill Chuck (REF 4100-134-000)
Handles wires, pins, and drill bits up to 1/8 in.
(3.2 mm) diameter.
4100-005-700 Rev-N
www.stryker.com