Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
9. SPARE PARTS
Available spare parts :
(See FIG. 10 - 11).
1 Replacement set complete.
1.1 Impeller kit with :
1.11 Nut.
1.12 Washer.
1.13 Impeller.
1.14 O-ring.
1.2 Mechanical seal kit with :
1.11 Nut.
1.12 Washer.
1.14 O-ring.
1.21 Mechanical seal complete.
1.3 Lantern kit with :
1.11 Nut.
1.12 Washer.
1.14 O-ring.
1.31 Ventilation valve.
1.32 Coupling guard.
1.33 Lantern.
1.4 Shaft kit with :
1.11 Nut.
1.12 Washer.
1.14 I-ring.
1.41 Impeller
1.42 Spring ring.
1.5 Coupling complete.
2 Motor/module unit.
3 Pump housing complete with :
1.14 O-ring.
3.1 Pump housing (SIL-DIL).
3.2 Stoppers for pressure gauge connections .
4 Fastening screws for lantern / pump housing.
5 Fastening screws for motor / lantern.
6 Nuts for motor / lantern fastening.
7 Washers for motor / lantern fastening.
8 Adapter ring.
9 Pressure gauge.
10 Module.
11 FIG. 11 - item 11 : fitting fork (available separately).
The fitting fork is absolutely necessary in all
CAUTION !
assembly work to set the correct impeller position
in the pump housing (See FIG. 11 - item 11) !
The fault-free operation of the pump can only be guaranteed if ori-
ginal spare parts are used.
When ordering spare parts, please give the above spare part num-
bers and descriptions together with all relevant data from the pump
and motor rating plates.
26
Publicidad
Tabla de contenido
