Use And Maintenance; Premise; Warranty; Warranty Deadline - Maschio GASPARDO Empleo Y Mantenimiento - Piezas De Repuesto

1 PREMISE

This instruction manual provides all specific information required for the correct operation of the appliance you have purchased. It
must be read carefully when the Monitor is purchased and referred to any time doubts arise on use or when maintenance must be
performed. The manual must be kept on board of the machine or, when this is not possible, it must be stored in a known and
accessible place to facilitate its reference. The regular operation of the equipment depends on a correct use and adequate
maintenance. Therefore, we recommend observing strictly that described in this manual, to prevent any inconvenience that can
jeopardise the correct operation and its lifespan. Moreover, information is provided for better using the equipment, as well as
instructions and useful advices for a correct maintenance. Strictly follow that described in this manual as the Manufacturer declines
any responsibility due to negligence and failure to comply with those provisions. The Manufacturer is available for ensuring an
immediate and accurate technical assistance and all it is required to improve the performance of the equipment.

1.1 WARRANTY

Upon delivery, immediately ensure that the machine has not been damaged during transport and that accessories are intact and
complete.
ANY CLAIMS MUST BE SUBMITTED IN WRITING WITHIN 8 DAYS FROM THE DELIVERY TO THE DEALER.
The purchaser can enforce his rights specified in the warranty only if he has complied with its conditions, indicated in the supply
contract.

1.1.1 WARRANTY DEADLINE

Besides that indicated in the supply contract, the warranty expires:
If limits indicated in the technical data sheet are exceeded.
If instructions described in this manual have not been strictly followed.
In case of improper use, defective maintenance or other errors performed by the client.
If modifications have been carried out without written authorisation of the manufacturer and non-original spare parts have
been used.
Code G19503490

USE AND MAINTENANCE

EN
- 3