Selection Of The Functions; Row Shut-Off (Tramline) - Maschio GASPARDO Empleo Y Mantenimiento - Piezas De Repuesto

4.4.7 SELECTION OF THE FUNCTIONS

The function selection key allows:
using arrows
confirm the selection, pressing the right arrow key;

4.4.8 ROW SHUT-OFF (TRAMLINE)

CONFIGURATION
Tramline (7, Fig. 15): This menu allows setting the number of row shut-off passages and the
pace used (symmetrical or asymmetrical).
The control unit offers multiple combinations depending on the work width of the seed drill and
sprayer width (Fig. 27). The seed drill work width must be set as described in chapter 4.4.5.
The term Right (RGT) and Left (LFT) is to be intended watching the equipment from the rear.
The function selection key allows:
selecting the number of passages required,by using arrows
added);
to select the pace required, use arrows
In all pace configurations, the width of the seed drill used is equal to that set (see chap. 4.4.5).
The sprayer width is set automatically, depending on the seed drill width and the number of set passages.
SYMMETRICAL" PACE
Fig. 28
"LFT ASYMMETRICAL" pace
Fig. 29
"RGT ASYMMETRICAL" pace
Fig. 30
Code G19503490
USE AND MAINTENANCE
to select the required function;
Tramline
(Figs. 28, 29 and 30);
Using the "SYMMETRICAL" pace, the system shuts off the all the tramline rows
symmetrically, of the right and left sides.
Using the "LFT ASYMMETRICAL" type, the system shuts off all the left tramline rows.
Using the "RGT ASYMMETRICAL" type, the system shuts off all the right tramline rows.
(maximum 15, to which the special sequences are
Fig. 27
EN
- 19