Dosing Setting; Info Menu - Maschio GASPARDO Empleo Y Mantenimiento - Piezas De Repuesto

4.2.1 DOSING SETTING

From the RATE screen, set the new dosing value (Fig. 12), using the function selection key (D,
Fig. 1):
1) Select the value to be modified using arrows
2) Set the new value, using arrows
3) Confirm the set value using the OK button or press ESC to cancel the operation.
At this point, the display shows the maximum work speed allowed by the system to obtain the set
dosing.
In Fig. 12, the value of [seeds/m
CONFIGURATION OPERATOR CONFIGURATION
Another method to modify the dosing value is the percentage increase (step). The step value is previously set in the
CONFIGURATION OPERATOR CONFIGURATION
used (Fig. 11). The maximum increase (or decrease) is equal to +(-) 50%.
Every dosing variation compared to the set value, will flash on the display.
The new value is indicated also in the MAIN screen, normally used when working.
Use the function key (6, Fig. 11) to reset the value of the set dosing.

4.3 INFO Menu

This menu allows displaying the total amount of product distributed when working, together with the partial and total area processed
(Fig. 13 and Fig. 14).
1) TOTAL displays:
1a) Total processed area
1b) Total seeds distributed
2) PARTIAL displays;
3) TOTAL and PARTIAL reset: enter the relative displays to reset the
counters;
4) Display of the TOTALS that cannot be reset:
4a) Total processed area
4b) Total processed time
5) Numerical index of the menu displayed
Code G19503490
USE AND MAINTENANCE
.
2
] is set; on the other hand, if the value of [Kg/Ha] is required, it must be set in the
CUSTOMISE menu; subsequently, the + and – function keys can be
CUSTOMISE
menu (as described in chapter 4.4.1.2).
Fig. 12
Fig. 13
Fig. 14
EN
- 10