GiBiDi BA230 Manual De Instrucciones página 42

42
UK
BA230 DISPOSAL
Gi.Bi.Di advises recycling the plastic components and to dispose of them at special
authorised centres for electronic components thus protecting the environment from
polluting substances.
SIMPLIFIED PROGRAMMING
1- Connect all the connections (wire motors using a 1,5 mm² wire)
2- Enter the installation code, and then set the type of function desired from menu A2/A3.
3- Set the number of motors used. Menu A4/A5.
4- Set the operation mode. Menu A6/A7/A8/A9.
5- Go to menu C21, and select «Y» to activate automatic time programming, then press «START» (+ key) (see
page 20 "Time learning procedure")
6- Go to menu C5 to choose the number of limit switches. We recommend programming a single limit switch
when stopping points are present.
7- Go to menu C6 to program slowdowns.
8- Use the dedicated menus to adjust each time parameter.
9- Press «ESC» to exit programming.
10- Check whether the force used by operators on the gate is either sufficient or excessive. Go to menu F to
adjust, if necessary.
BA230