Status Strip; Battery Life Indicator - Blackmagic Design Cinema Camera Manual Del Usuario

Menu Settings
30
1 2 3 4
1. Media and
Recording Status
2. Timecode
3. Recording Format
4. Video Format/Frame Rate
When using battery power, the camera will only activate the image stabilizer while recording, as the
lens draws additional power from the camera to operate the image stabilizer. When external power
is connected to the camera, the image stabilizer will be active any time you set the lens stabilizer
switch to 'on'.

Status Strip

5 6 7 8 9
Your chosen settings are always displayed on a status strip, which runs the length of the LCD, showing
a convenient summary of the camera's current settings.

Battery Life Indicator

When the remaining charge drops below 25% capacity, the status strip will show the battery status
in red to warn you that battery life is running low.
SD/SSD Activity Icons
The status strip displays important information showing the state of the inserted media.
5. F-Stop
6. ISO Setting
Moving Dots
7. Shutter Angle
8. White Balance
9. Battery Life Indicator
No Card/SSD
Ready
Red Icon
Flashing Red Icon
Card/Disk Full
Playback mode
Timecode
When you see the moving dots, the camera is checking and preparing
the media.
This means no media is detected or present in the camera.
Ready to record.
Recording.
Dropped frames were detected.
Appears when SD card or SSD is full.
Displays play, fast forward and reverse icons.
Displays the duration of clips during recording and playback from your SD
card or SSD.