Using Blackmagic Ultrascope - Blackmagic Design Cinema Camera Manual Del Usuario

Camera Video Output
43
Blackmagic UltraScope - full screen view. Blackmagic
UltraScope lets you accurately monitor the video and
audio levels from your Blackmagic Cinema Camera or
Production Camera 4K.

Using Blackmagic UltraScope

What is Blackmagic UltraScope?
Blackmagic UltraScope software provides waveform monitoring of the video output from your
Blackmagic Cinema Camera or Production Camera 4K.
Previously, broadcast quality television and post production scopes were incredibly expensive and
bulky solutions that only let you see one scope at a time on a tiny screen! Some scopes look ugly and
unappealing to your client. With Blackmagic UltraScope, you get 6 wonderful scopes to monitor all
aspects of your video signal, perfect for checking levels on your camera while shooting. Any camera
adjustments are immediately seen using Blackmagic UltraScope!
Simply connect a Thunderbolt cable from your camera to the Thunderbolt port on your computer,
turn on your camera and launch UltraScope!
Installation Requirements
The Blackmagic UltraScope software interface requires a computer display with a minimum resolution
of 1280 x 800 pixels to view two scopes simultaneously. Blackmagic Design recommends viewing all
6 scopes simultaneously by using a computer display resolution of 1920 x 1200 or 1920 x 1080 pixels.
Please see the support pages at www.blackmagicdesign.com/support for a comprehensive list of
the latest minimum system requirements for Blackmagic UltraScope.
Understanding Blackmagic UltraScope Views
Blackmagic UltraScope has two different views available depending on your workflow needs and
screen resolution. You have the choice of viewing six displays in 'full screen' view, or for more compact
viewing, choose any 2 displays in '2-up' view.
The display view can be selected from the 'view' menu.
Choose 'full screen' to enter Full Screen view. If this option is unchecked, 2-up view will be displayed.
You can quickly switch between Full Screen view and 2-up view by using the hot key CMD-F on Mac
OS X, or CTRL F on Windows.
In 2-up view, select the desired left and right scopes by opening the 'view' menu or by right-clicking
anywhere in the UltraScope window. Make your selections from the 'left view' and 'right view'
menu options.
If you want the scopes to swap sides, select the left or right view and set it to be the same as the
other view. The scopes will swap sides because the 2-up view never displays the same scope in both the
left and right views.