Avaya AWH75 Manual Del Usuario página 7

Tabla de contenido

Publicidad

Adjusting Fit
1
2
NOTE: Depending on your preference, you can
replace the pre-installed leatherette ear cushions
with the included alternative foam cushions.
1. Adjust headband to fit.
2. Rotate voice tube until it is pointed towards your chin.
Multi-shift Pairing
1
Enable
Disable
1. To pair another headset to the same base, you must first enable the multi-shit
pairing feature. Long press (5 sec.) the speaking volume minor adjust up button on
back of the base until the power indicator flashes.
2. Place a charged headset in charging cradle. The red indicator light on base will flash
for 2 seconds if the multi-shift pairing feature is enabled.Within 10 of doing so, press
either the "+" or"-" listening volume button for 3 seconds until the green talk indicator
lights to indicate pairing mode and goes out after successful pairing. Repeat steps 1
and 2 if headset and base do not link when call control button is pressed.
NOTE: Only the last paired headset will work with the base. You must NOT be in talk mode (on
a call) to enable or disable this feature.
To disable the multi-shift pairing feature, long press (5 sec.) the speaking volume minor
adjust down button until the power indicator light flashes.
12
3
2
Making/Answering/Ending Calls
Setup 1, 2, 3 & 4
To make a call, press call control button. Dial tone should sound through headset
(If not, check compatibility—see Setup 1, 2, 3 & 4). Dial using the telephone keypad.
To answer a call, press the call control button on the headset.
To end a call, press the call control button on the headset. If either you or the recipient
have trouble hearing, please check compatibility (Setup 1, 2, 3 & 4).
13

Publicidad

Tabla de contenido
loading

Tabla de contenido