Using Your Ceiling Fan - LUCCI Air AIRFUSION MOTO Manual Del Usuario

AIRFUSION MOTO Installation Instructions
INSTALLATION OF THE REMOTE CONTROL HOLDER (Fig. 10)
1. Locate a suitable wall to fix the remote control holder with the 2 screws. (Fig.10a).
2. Slide the remote into the holder. (Fig. 10b)
Fig. 10a
Fig. 10b

USING YOUR CEILING FAN

NOTE: The remote and receiver will need to be paired after the installation of the ceiling fan.
NOTE: When two or more ceiling fans are installed in one location, please refer to the
instruction on the next page.
BATTERY INSTALLATION (Fig.11)
loosen the screw from the battery cover.
1.
Install the CR2032 button battery into the compartment. Ensure the battery is inserted with the correct polarity.
2.
3. Install the battery cover back onto the remote and secure with the screw.
Install the 3V CR2032 DC battery in the compartment. Please make sure the polarity of the battery is correct.
(Fig. 11)
Fig. 11
9 | P a g e