C. THE HELMET
VENTILATION DEVICE 5 – MINIMUM
LEVEL OF FRESH AIR
The special shaping of the top of the chin vent
provides the helmet with a guaranteed minimum
ventilation function that ensures a constant supply
of fresh air. The air entering in this way is regulated
so that the rider barely notices it, but it provides an
effective supply of fresh air from a speed as low as
30 kph (provided the helmet is positioned fully in the
air flow when travelling). This function counteracts
any build-up of mist on the visor and any excessive
concentration of CO
, even when the helmet is fully
2
closed.
15. ADDITIONAL SAFETY FEATURES
ANTI-ROLL-OFF SYSTEM (A.R.O.S.)
The anti-roll-off system specially developed by SCHUBERTH and provided as
a safety feature in every SCHUBERTH motorcycle helmet ensures that, if the
chinstrap is fastened and correctly adjusted
a) the helmet cannot pivot off the head
from behind,
b) the risk of contact between the chin
section of the helmet and the chin or
neck of the rider is minimised due to the
low angle of tilt and
c) the consequences of the helmet hitting
the rib cage as the result of an accident
are reduced.
82
REFLECTIVE PANELS
Together with the silver reflective strips located laterally at the back of
the neck collar, the two reflective panels integrated into the left and right
areas under the face shield help make the motorcycle rider more noticeable
on the road, especially in conditions of poor visibility. If the helmet is plain
(no decoration), the SCHUBERTH name also appears on the front and back
of the helmet in a reflective film.
Note:
Keep the reflective safety areas clean.
Note:
When riding in France, local law requires that further reflective safety
stickers be attached to the front, back and both sides of the helmet.
EN
83