Ventilation; Retention System; Storing The Helmet - SCHUBERTH C3 pro Manual De Usuario

G. MAINTENANCE AND CARE

5. VENTILATION

VENTILATION COWL
When necessary, the head ventilation system's air inlet cowl can be removed
to clean the ventilation mechanism.
1. When necessary, the head ventilation
system's air inlet cowl can be removed
to clean the ventilation mechanism.
2. Then slide the flat end of the control
unit under the edge behind the
ventilation cowl and remove the latter
by levering it upwards.
3. On completion of the cleaning, fix
the ventilation cowl back in place
by hooking it into the front of the
ventilation mechanism and pressing it
into the helmet shell until you hear an
audible click.
4. When this has been done, insert the
control unit through the ventilation
cowl and into the ventilation
mechanism.
94

6. RETENTION SYSTEM

The metal components of the retention system do not require maintenance.

7. STORING THE HELMET

Store the helmet in the helmet bag supplied in a dry, well-ventilated and
stable place. Always position the helmet so that it cannot fall to the floor.
Damage that occurs in this way is not covered by the warranty.
Note:
Store the helmet out of the reach of children and animals.
EN
95