Accessories And Spare Parts; Communication Systems; Ordering Original Schuberth Parts - SCHUBERTH C3 pro Manual De Usuario

H. ACCESSORIES AND SPARE PARTS

1. COMMUNICATION SYSTEMS

Your C3 PRO is supplied ready for installation of the SCHUBERTH
SRC-System™ as standard. The C3 PRO is already fitted with two integrated
antennas to amplify reception and a Bluetooth
with the best possible radio reception.
You can find out more about the SRC-System™ from your specialist dealer
and at www.SCHUBERTH.com
Integrated antennas for optimal
radio reception
Plug for connection with the
SRC-System™
Caution:
The installation of a communication system (including basic headsets)
constitutes a modification to the helmet. For this reason it is necessary
for any communication system and headset intended for installation
into a specific model of helmet to be tested and approved in line with
the ECE-R 22.05 European helmet standard, otherwise the helmet's
approval and compliance with insurance requirements become invalid on
installation.
96
®
connection, to provide you
Bluetooth ® antenna
Evidence of approval in line with ECE-R 22.05 in connection with a
specific communication system is only valid if certified by an official
regulatory office of an EU member state. Any other form of information
from these or other institutions (e.g. on the general suitability of
communication systems for use in motorcycle helmets) is of no
relevance and the helmet will lose its approval.

2. ACCESSORIES AND SPARE PARTS

We recommend that you only use original SCHUBERTH accessories and
spare parts for your SCHUBERTH helmet as they are specially adapted to
your helmet model.
Caution:
For safety reasons, all other parts of the helmet should only be replaced
by your specialist dealer.

3. ORDERING ORIGINAL SCHUBERTH PARTS

Please contact your specialist dealer for original SCHUBERTH accessories
and replacements. To find your nearest SCHUBERTH specialist dealer, please
go to www.SCHUBERTH.com
EN
97