ETVmille_ABS_UK.book Page 26 Friday, October 24, 2003 12:25 PM
AUXILIARY EQUIPMENT
UNLOCKING/LOCKING THE
PASSENGER SEAT
◆
Position the vehicle on the stand, see p.
58 (POSITIONING THE VEHICLE ON
THE STAND).
◆
Introduce the key (1) in the seat lock.
◆
Rotate the key (1) clockwise, lift and
withdraw the seat (2) from behind.
NOTE
The glove/tool kit compartment is
positioned under the passenger seat.
To reach it, proceed as follows:
◆
Remove the glove/tool kit compartment
cover (3).
26
use and maintenance ETV mille Caponord ABS
All manuals and user guides at all-guides.com
To lock the seat (2), proceed as follows:
NOTE
Before lowering and locking the
seat (2), make sure that you have not left
the key in the glove/tool kit compartment.
◆
Insert the two front couplings (4) in the
relevant seats (5).
◆
Lower and press the passenger seat (2),
making the lock snap.
!
WARNING
Before leaving, make sure that the seat
(2) is properly locked.
UNLOCKING/LOCKING THE
GLOVE/TOOL KIT COMPARTMENT
COVER
If a larger surface for the luggage is
needed, when the rider travels alone the
passenger seat can be removed. To carry
out this operation, it is necessary to lock
the glove/tool kit compartment cover (3).
In this case:
◆
Remove the passenger seat, see p. 26
( U N L O C K I N G / L O C K I N G
PASSENGER SEAT).
◆
Remove the lock coupling (6) from its
seat.
◆
Insert the lock coupling (6) and fit it
correctly in the appropriate seat (7) on
the glove/tool kit compartment cover
(see figure).
◆
Correctly position the glove/tool kit
compartment cover (3) in its seat.
T H E