Changing The Number Plate Bulb - APRILIA ETV mille Caponord 2003 Libro De Uso Y Mantenimiento

ETVmille_ABS_UK.book Page 105 Friday, October 24, 2003 12:25 PM
7
6
5
The following operations refer to a single
bulb, but are valid for both.
!
WARNING
Wait until the exhaust silencer have
completely cooled down.
◆
Position the vehicle on the stand, see p.
58 (POSITIONING THE VEHICLE ON
THE STAND).
◆
Unscrew and remove the two screws (6).
◆
Remove the protection screen (7).
!
CAUTION
Upon reassembly, correctly position the
protection screen in its seat. Tighten
the screw (6) carefully, without exerting
too much pressure, in order to avoid
damaging the protection screen.
◆
Press the bulb (5) slightly and rotate it
anticlockwise.
◆
Extract the bulb (5) from its seat.
All manuals and user guides at all-guides.com
5
!
Insert the bulb in the bulb socket,
making the two bulb pins coincide with
the relevant guides on the socket.
◆
Correctly install a new bulb of the same
type.
CAUTION
9
8
CHANGING THE NUMBER PLATE
BULB
Carefully read page 101 (BULBS).
!
WARNING
Wait until the engine has completely
cooled down.
!
CAUTION
Do not pull the electric wires to extract
the bulb socket.
◆
Working on the lower side of the number
plate holder, grasp the bulb socket (8),
pull it and extract it from its seat.
◆
Withdraw the bulb (9) and replace it with
a new one of the same type.
use and maintenance ETV mille Caponord ABS 105