ETVmille_ABS_UK.book Page 77 Friday, October 24, 2003 12:25 PM
1
REMOVING THE OIL SUMP GUARD
Carefully read p. 60 (MAINTENANCE).
!
WARNING
Wait until the engine and the exhaust
silencer have completely cooled down.
◆
Position the vehicle on the stand, see p.
58 (POSITIONING THE VEHICLE ON
THE STAND).
◆
Unscrew and remove the four screws
(1).
!
CAUTION
H a n d l e t h e p l a s t i c a n d p a i n t e d
components with care to avoid scraping
or damaging them.
◆
Remove the oil sump guard (2).
NOTE
Upon reassembly, make sure that
the oil sump guard is positioned correctly.
All manuals and user guides at all-guides.com
1
1
2
5
1
REMOVE THE LEFT FAIRING
Carefully read p. 60 (MAINTENANCE).
Wait until the engine and the exhaust
silencer have completely cooled down.
◆
Position the vehicle on the stand, see p.
58 (POSITIONING THE VEHICLE ON
THE STAND).
◆
Unscrew and remove the three screws
(3).
◆
Unscrew and remove the upper screw
(4).
4
3
3
3
!
WARNING
7
8
!
CAUTION
H a n d l e t h e p l a s t i c a n d p a i n t e d
components with care to avoid scraping
or damaging them.
◆
Remove the side fairing (5).
NOTE
Upon reassembly, correctly fit the
appropriate pin in the seat (6) and position
the plastic elements (7) (8) in their seats.
use and maintenance ETV mille Caponord ABS
6
77