Storage; Troubleshooting - Silvercrest SKM 550 B3 Instrucciones De Uso

NOTE
The blender
that it does not get jammed in the dishwasher.

11. Storage

Place the mains cable in the cable storage compartment i when storing
■
the appliance.
Store the cleaned appliance in a clean, dust-free and dry location.
■

12. Troubleshooting

The appliance suddenly stops working:
The appliance has overheated and triggered the automatic safety cut-off.
■
Turn the dial r to 0.
–
–
Unplug the appliance from the mains socket.
–
Allow the appliance to cool down for 15 minutes.
–
If the appliance has still not cooled off completely after 15 minutes, it
will not start.
–
Wait another 15 minutes and then try to switch it on again.
You have exceeded the maximum fill level for ingredients.
■
–
Allow the appliance to cool down, as described above.
–
Note the maximum filling quantity and reduce it accordingly (see ta-
ble "Recommended filling quantities").
The appliance will not switch on:
–
Check that the plug is correctly connected to a wall socket.
Check to make sure the drive protection cover for the blender 5 and
–
for the continuous shredder 8 and the mixing bowl 7 are all posi-
tioned correctly and clicked into place.
Check to see if the swivel arm t is in the required operating position
–
(see section "Operating positions for accessories").
│ GB │ IE
■ 22
5
is also suitable for cleaning in a dishwasher. Make sure
SKM 550 B3