Technical Specifications - Silvercrest SKM 550 B3 Instrucciones De Uso

The blender will not start. The appliance hums:
The blade in the blender 5 is blocked.
■
Turn the dial r to 0.
–
–
Unplug the appliance from the mains socket.
Open the blender 5 and remove the cause of the blockage.
–
Close the blender 5, insert the plug into the socket and switch the
–
appliance on again.
If the malfunction cannot be corrected using any of the suggestions above, or
if you notice other types of malfunctions, contact our Customer Service de-
partment.
13. Technical specifications
Nominal voltage
Nominal power
CO time: blender 5
Capacity
Mixing bowl 7
Capacity
Blender 5
Usable capacity of blender 5 1 l
Protection class
CO time
The CO time (continuous operation time) is the amount of time an appliance
can be operated without the motor overheating and becoming damaged.
After the appliance has been operated for this length of time, it must be
switched off until the motor has cooled down.
We recommend the following operating times when working with the continu-
ous shredder 8 and mixing bowl 7:
After using it for 10 minutes, allow the appliance to cool down for 15 minutes.
Otherwise the appliance may overheat and activate the safety cut-off (see
section "Troubleshooting").
SKM 550 B3
220–240 V ∼ (AC), 50 Hz
550 W
3 minutes
3.8 l
1.5 l
II / (double insulation)
All of the parts of this appliance that
come into contact with food are food-safe.
GB │ IE │
23 ■