Customised Logo For Printout; Preparing The Vehicle For The Alignment Operation; Standard Working Sequence - Corghi EXACT LINEAR PLUS Manual De Uso

for both front and rear.
Thrust: thrust axis is axis of reference for both
front and rear. Setting the steering-wheel
with the front half toe values equal ensures
the steering wheel will be straight in normal
operating conditions. If the thrust axis is axis
of reference for the rear axle, the rear half toe
values area always identical.
Straight steering wheels: reference axis is axis
of symmetry for rear and thrust axis for front.
Setting the steering-wheel with the front half
toe values equal ensures the steering wheel
will be straight in normal operating conditions.
➥ Save previous data
Automatic: vehicle situation before adjustment
is saved automatically.
Manual: vehicle situation before adjustment
is saved manually.
➥ Caster measurement steering lock
20°: Steering always locked to 20° for caster
measurement.
User's choice: Caster measurement steering
lock at 10° or 20°.
➥ Front axle adjustment
Caster.
Total toe – setback.
➥ Rear axle adjustment
Total toe – thrust angle.
Setback – track difference.
➥ Thrust angle
Clockwise positive: angle is positive when
thrust axis is turned clockwise in relation to
the axis of symmetry.
Anticlockwise positive: angle is positive when
thrust axis is turned anticlockwise in relation
to the axis of symmetry.
The logo is the image shown as background in
the "Main Menu" (Fig. 20) and used as three-
dimensional image in the screen saver.
2 customised logos can be entered: they are
selected from the set-up as the "Customised 1"
and "Customised 2" logos.
The customised logo files must be in bitmap for-
mat and must have dimensions of 800x337 pixels.
Save the files in C: \ program files \ alignment \
graphics \ logo\.
The file for the "Customised 1" logo is LogoFeF.
bmp, for the "Customised 2" logo it is LogoFeW.
bmp.
64
Logo

Customised logo for printout

The customer's logo can be added to the printed
job report.
Replace file C:\ Programs Files \Alignment\Graph-
ics\Image\IMGPrBarra4.bmp with an equivalent
containing the logo of your choice.
Warning! The file dimensions must be 1100 x
354 pixels.
PREPARING THE VEHICLE
FOR THE ALIGNMENT
OPERATION
For the wheel alignment operation to be carried
out correctly, all parts of the vehicle must conform
to the constructor's specifications; in particular,
it is important to check the tyre pressure and
eliminate any backlashes in the bearings and
ball joints.
Place the vehicle over the pit or on the lift
equipped for the alignment operations, taking
care to ensure that the turntables and oscillating
footboards are locked in position.
Fit the self-centring clamp/target assembly on the
wheels and lock the clamp jaws onto the wheel
rim using the handle. Mount the targets on the
front and rear wheels.
CAUTION
Do not over-tighten the clamp as this may
cause it to bend.
STANDARD WORKING
SEQUENCE
Alignment procedure for 2-axle vehicles (cars).
1) Aligner switch-on.
2) Start work.
3) Databank / Job record.
4) Preparation for wheel alignment.
5) Wheel diameter input.
6) Compensation.
7) Chassis height input.
8) Angle measurement with steering locked to
10° or 20°.
9) Data summary.
10) Rear axle measurement.
11) Front axle measurement.
12) Angle measurement with steering locked
to 10° or 20°.
Operator's manual EXACT LINEAR