- Keep the turntables and the oscillating
footboards on which the vehicle alignment is
performed perfectly clean and do not oil or
grease them.
SCRAPPING
If the machine is to be scrapped, remove all
electrical, electronic, and plastic components
and dispose of them separately, as provided for
by local legislation.
ENVIRONMENTAL
INFORMATION
The disposal procedure described below must
only applies to machines with the symbol of
the waste bin with a bar across it
their data plates.
This product may contain substances which may
cause damage to the environment and human
health if not disposed of properly.
We are therefore providing you with the informa-
tion below in order to prevent these substances
from being released into the environment, and
to improve the use of natural resources.
Electrical and electronic equipment must not
be disposed of with ordinary municipal waste;
it must be disposed of separately by authorised
facilities.
The symbol of the waste bin with a bar across it,
which appears on the product and on this page,
reminds users that the product must be disposed
of properly at the end of its working life.
This prevents the inappropriate disposal of
the substances which this product contains, or
the improper use of some of them, from having
hazardous consequences for the environment
and human health. It also helps to ensure the
recovery, recycling and reuse of many of the
materials these products contain.
To allow this, the producers and distributors of
electrical and electronic equipment organise
special systems for the collection and disposal
of such equipment.
Operator's manual EXACT LINEAR
At the end of the product's working life, contact
your dealer for information about disposal
procedures.
When you purchase this product, your dealer will
also inform you that you may return another worn-
out appliance to him free of charge, provided it
is of the same type and has provided the same
functions as the product just purchased.
Anyone disposing of the product otherwise than
as described above will be liable to prosecution
under the legislation of the country where the
product is scrapped.
We also urge you to adopt other environment-
friendly practices: recycle the internal and ex-
ternal packaging which comes with the product
and dispose of spent batteries (if the product
has them) properly.
With your help, we can reduce the amount of
on
natural resources used to produce electrical
and electronic equipment, minimise the use
of landfills to dispose of old products, and im-
prove quality of life by preventing the discharge
of potentially hazardous substances into the
environment.
FIREFIGHTING
EQUIPMENT TO BE USED
When choosing the most suitable fire-extinguish-
er refer to the table below.
Dry materials
Water
Foam
Powder
CO
2
YES* Use only if more appropriate extinguishers are not
on hand or when the fire is small.
Flammable liquids
Water
Foam
Powder
CO
2
Electrical equipment
Water
Foam
Powder
CO
2
YES
YES
YES*
YES*
NO
YES
YES
YES
NO
NO
YES
YES
EN
79