VALBERG MFO 71 C X 205T Instrucciones De Utilizacion página 27

C C
Installation and connections
Install the appliance in accordance the gas and electricity regulations in force.
Power supply connection
Connect the appliance to an earthed socket protected by a miniature circuit breaker of sufficient
capacity, as indicated in the "Technical characteristics" table.
Have a qualified electrician earth your installation when using the appliance with or without a
transformer. Our company cannot be held responsible for damage resulting from the use of
the appliance without an earthing installation in accordance with the local regulations in force.
The appliance must only be connected to the power supply
by an authorised and qualified person. The warranty period
of the appliance starts only after its correct installation.
The manufacturer cannot be held responsible for damage
resulting from procedures carried out by unauthorised
persons.
A damaged power cable must be replaced by a qualified
electrician. Otherwise there is a risk of electric shock,
short circuit or fire!
• The connection must comply with the national regulations in force.
• The values of the power supply must correspond to those given on the rating plate of the
appliance. Open the door to see the rating plate.
• The power cable of the appliance must comply with the values in the "Technical
characteristics" table.
Before carrying out any electrical installation operation,
the appliance must be disconnected from the power supply
network, otherwise you risk an electric shock!
Using the appliance Utilisation de l'appareil
20 20 EN FR