VALBERG MFO 71 C X 205T Instrucciones De Utilizacion página 48

D D
1
Rear glazed panel
2
Rear glazed panel (may not be available on your product.)
 If your appliance is fitted with an interior glass panel (2), repeat this operation to remove
it.
 The first step in reassembling the door is to reinstall the interior glass panel (2). Position
the chamfered corner of the glass panel so that it fits into the chamfered corner of the plastic
notch. (If your appliance is equipped with an interior glass panel). The inner glass panel (2)
must be installed in the plastic notch, near the bottom glass panel (1).
When you install the bottom glass panel (1), check that the printed side of the panel faces

the second glass panel. It is important to insert the lower corners of the bottom glass panel
(1) into the lower plastic notch.
 Push the plastic piece into the frame until you hear a "click".
Replacing the oven light
Before replacing the oven light bulb, make sure that
the appliance is unplugged from the power supply
and that it is cool to avoid any risk of electric shock.
Hot surfaces can burn!
The oven bulb is a special electric light bulb capable of
withstanding heat of up to 300 °C. For more details, see
Technical Specifications. Oven bulbs are available from
your authorised technician.
The location of the lamp may differ from the illustration.
The bulb used in this fixture is not suitable for lighting
a room in a home. This bulb is intended to help the user
distinguish between foodstuffs.
Useful information Informations pratiques
41 41 EN FR