Transportation And Storage; Inspect The Delivery; Transportation Guidelines - Xylem LOWARA e-MPA Manual De Instalación, Funcionamento Y Mantenimiento

en - Original instructions
5. The object of the declaration described
above is in conformity with the relevant
Union harmonisation legislation:
Directive 2014/30/EU of 26 February 2014
(electromagnetic compatibility)
6. References to the relevant harmonised
standards used or references to the other
technical specifications, in relation to which
conformity is declared:
EN 61000-6-1:2007, EN 61000-6-
3:2007+A1:2011
7. Notified body: -
8. Additional information: -
Signed for and on behalf of:
Xylem Service Italia S.r.l.
Montecchio Maggiore, 01.02.2017
Amedeo Valente
(Director of Engineering and R&D)
rev.00
Lowara is a trademark of Xylem Inc. or one of its
subsidiaries.
1.6.3 EU Declaration of Conformity
(Original)
Xylem Service Italia S.r.l., with headquarters in Via
Vittorio Lombardi 14 - 36075 Montecchio
Maggiore VI - Italy, hereby declares that the
product:
Pump (see label on first page)
fulfills the relevant provisions of the following
European directives:

Machinery 2006/42/EC (ANNEX II - natural
or legal person authorised to compile the
technical file: Xylem Service Italia S.r.l.)
and the following technical standards

EN ISO 12100:2010, EN
809:1998+A1:2009
Montecchio Maggiore, 01.02.2017
Amedeo Valente
(Director of Engineering and R&D)
rev.00
Lowara is a trademark of Xylem Inc. or one of its
subsidiaries.

2 Transportation and Storage

2.1 Inspect the delivery

1. Check the outside of the package for
evident signs of damage.
2. Notify our distributor within eight days of
the delivery date, if the product bears
visible signs of damage.
16
Unpack the unit
1. Follow applicable step:
–
If the unit is packed in a carton, then
remove the staples and open the
carton.
–
If the unit is packed in a wooden
crate, then open the cover while
paying attention to the nails and
straps.
2. Remove the securing screws or the straps
from the wooden base.
2.1.1 Inspect the unit
1. Remove packing materials from the
product.
Dispose of all packing materials in
accordance with local regulations.
2. Inspect the product to determine if any
parts have been damaged or are missing.
3. If applicable, unfasten the product by
removing any screws, bolts, or straps.
4. Contact the local sales representative if
there is any issue.

Transportation guidelines

2.2
Precautions
WARNING:
 Observe accident prevention
regulations in force.
 Crush hazard. The unit and the
components can be heavy. Use
proper lifting methods and wear
steel-toed shoes at all times.
 The load capacity of the lifting ropes
or slings is reduced the more angle
β increaser, see
and Figure
Check the gross weight that is indicated on the
package in order to select proper lifting
equipment.
Position and fastening
Keep the pump or the pump unit in the same
position in which it was supplied from the factory.
Make sure that the pump or pump unit is
securely fastened during transportation and
cannot roll or fall over.
WARNING:
 Do not use eyebolts screwed on
the motor for handling the whole
electric pump unit.
 Do not use the shaft end of the
pump or of the motor to move the
pump, the motor or the unit.

Eyebolts screwed onto the motor may be
exclusively used to move the individual
motor or, in case of a not balanced
distribution of weights, to partially lift the
unit vertically starting from a horizontal
displacement.
Pump unit must always be fixed and transported
as shown in
Figure 4, and the pump without
motor must be fixed and transported as shown in
Figure 5 and Figure 6.
Figure 4, Figure 5
6.