Qlogic QME8242 Guia Del Usuario página 111

iSCSI Configuration Using Fast!UTIL: QLogic QME8242 Mezzanine Card User's Guide
a. On the iSCSI Boot Settings window, select Adapter Boot Mode and set it to Manual.
b. On the iSCSI Boot Settings window, select Primary Boot Device Settings.
5. On the Primary Boot Device Settings window
Figure 4. Fast!UTIL: Primary Boot Device Settings Window
a. To scan for the specified target, highlight the primary LUN Target IP, and then press <Enter>.
b. Select the target from the list of discovered targets on the Select iSCSI Device window, as shown in
5.
Figure 5. Fast!UTIL: Select iSCSI Device Window
file:///T|/htdocs/NETWORK/QLogic/71922/en/fastutil.htm[9/26/2012 4:26:21 PM]
All manuals and user guides at all-guides.com
(Figure 4), specify the target parameters.
Figure