Qlogic QME8242 Guia Del Usuario página 506

Configuración de la descarga de iSCSI con QConvergeConsole: Guía del usuario de la tarjeta mezzanine QLogic QME8242
IPv4_Address_State
IPv6_Link_Loc_Address_State
IPv6_Address0_State
IPv6_Address1_State
IPv6_Default_Router_State
IPv6_MCast_Listnr_Disco_Enable
ACB_Version
AFW_Serlz_Task_Mngmt
Large_Frames
*** Displaying IPv6 Settings inst=0 ***
IPv6_Addr_Local_link
IPv6_Addr_Routable0
IPv6_Addr_Routable1
Default_IPv6_Router
IPv6_Port
IPv6_Gratuitious_Neighbor_Ad_Enable :
IPv6_Redirect_Enable
*** Displaying IPv6 TCP Settings inst=0 ***
IPv6_Nagle
IPV6_TCP_Timer_Scale
IPv6_TCP_Time_Stamp
*** Displaying Remaining parameters inst=0 ***
ACB_Supported
Values noted with (*) are read only.
Modificación de los parámetros de iSCSI delnivel de puerto
Utilice el comando –n para modificar los parámetros de iSCSI delnivel de puerto.
Opciones de línea de comando:
-n <hba_port_inst> <config_name|config_alias> <value> <config_name|config_alias> <value>
Ejemplo:
En el siguiente ejemplo, la instancia del puerto HBA es 0 y el cambio de parámetro es activar el resumen de encabezados de
iSCSI.
$qaucli -pr iscsi -n 0 iSCSI_Header_Digests on
O:
$qaucli -iscsi -n 0 iSCSI_Header_Digests on
Port Parameters:
The following table lists the parameters that may be configured using the -n option in non-interactive
mode.
Full Parameter Name
-------------------
AFW_Device_Timeouts
AFW_Delayed_Ack
AFW_AutoConnect
AFW_Serlz_Task_Mngmt
ExeThrottle
FirstBurstLen
Force_Negotiate_Main_iSCSI_Keys
IP_ARP_Redirect
IPv6_MCast_Listnr_Disco_Enable
iSCSI_Alias
iSCSI_Header_Digests
iSCSI_Data_Digests
iSCSI_Immediate_Data
iSCSI_Initial_R2T
iSCSI_Snack
iSCSI_Discovery_Logout
iSCSI_Strict_Login
KeepAliveTO
Large_Frames
MaxBurstLen
MaxOutstandingR2T
TCP_DHCP
TCP_Nagle
TCP_Time_Stamp
TCP_Window_Scale
VLAN_Enable
VLAN_User_Priority
VLAN_ID
IP_Address
IP_Subnet_Mask
IP_Gateway
ZIO
FW_ZIO_Enable_Mode
Task_Management_Timeout
ENABLE_IPV4
ENABLE_4022IPV4
ENABLE_IPV6
LOC_LINK_AUTO
ROUTABLE_AUTO
LDROUTER_AUTO
IPv6_Addr_Local_link
IPv6_Addr_Routable0
file:///T|/htdocs/NETWORK/QLogic/71922/sp/ioffload.htm[9/26/2012 4:31:31 PM]
All manuals and user guides at all-guides.com
: Valid(*)
: Invalid(*)
: Invalid(*)
: Invalid(*)
: No router(*)
: off
: 2(*)
: off
: off
: fe80::
: ::
: ::
: ::
: 3260
off
: off
: off
: 3(*)
: on
: on(*)
Alias Name Allowable Values
---------- ----------------
AFWDT on or off
AFDACK on or off
AFWC on or off
AFWSTM on or off
ET 0 to 32767
FB 0 to 32767
FNMIK on or off
IPARP on or off
IPV6MLDEN on or off
IALS Character string
IHD on or off
IDD on or off
IID on or off
IIR2T on or off
ISNACK on or off
ID on or off
IS on or off
KATO 0 to ?
LRGFRM on or off
MBL 0 to ?
MOR2T 0 to ?
TCPDHCP on or off
TCPN on or off
TCPTMS on or off
WINSCALE 0 to 14
VLAN on or off
VLANUPRIOR 0 to 7
VLANID 0 to 4095
IPAD IPv4 address format
IPSM IPv4 address format
IPGW IPv4 address format
ZIO 2 to 16
ZIOE on or off
TMTO 0 to 65535
EIPV4 on or off
E4022IPV4 on or off
EIPV6 on or off
LOCLA on or off
RAUTO on or off
LDRA on or off
IPLL IPv6 address format
IPR0 IPv6 address format
(not for 4010s)