Descargar Imprimir esta página

Safety Information For Replacing The Charging Cable; Led Indicators; Led Operating Indicator; Led Fault List - Webasto Next Manual De Instrucciones

Ocultar thumbs Ver también para Next:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 272
Safety information for replacing the
3.7
charging cable
DANGER
Danger of fatal electric shock.
Switch off and secure the power supply to the
u
charging station.
NOTE
Only use genuine Webasto parts.

LED indicators

3.8

LED operating indicator

3.8.1
Operating indicator: see Fig. 7 upper half.
Operating
Description
indicator
LED not lit:
N1
Charging station is off.
White chase light running up and down:
N2
Charging station is starting up.
LED is green:
N3
Charging station is on standby.
LED pulsing blue:
N4
Charging station being used; charging
vehicle.
Blue chase light running up and down:
N5
Charging coupling connected to the vehicle,
charging interrupted.
Green chase light running up and down:
N6
The charging station is in operation but the
"Scan & Charge" function is locked.
Orange chase light running up and down:
N7
Charging process interrupted by power sup-
ply company.
5111233B_ISI_Next

LED fault list

3.8.2
Fault indicators: see Fig. 7 lower half.
Fault
Description
list
LED lights up green, there is additionally a yellow
F1
pulse:
The charging station has become hot and charges
the vehicle with reduced power. After a cool-
down phase the charging station continues the
normal charging cycle.
LED is yellow and an acoustic signal sounds for
F2
0.5 s:
Overtemperature. The charging function has been
interrupted and after a cool-down phase the
charging station continues the normal charging
cycle.
LED lights up green, there is additionally a red
F3
pulse and an acoustic signal sounds for 0.5 s:
There is a fault in the power connection to the
charging station, phase monitoring is active, the
power supply is outside the valid range of 200 V
to 260 V.
u
A qualified electrician should check the phase
sequence (clockwise phase sequence required),
network frequency, DIP switch setting and
protective conductor resistance.
LED pulses red for 1 s at 2 s intervals and an
F4
acoustic signal sounds for 0.5 s, and then for 5 s
following a pause of 1 s:
There is a fault in the vehicle.
u
Re-connect the vehicle.
LED pulses red for 0.5 s at 0.5 s and 3 s intervals.
F5
An acoustic signal sounds for 0.5 s:
There is an internal fault with an extra-low
voltage (e.g. 12 V).
Checking by an authorised electrician.
u
LED is red and an acoustic signal sounds for 0.5 s.
F6
Then, after a pause of 1 s, the acoustic signal
sounds for 5 s:
There is a problem in the voltage or system mon-
itoring.
Fault
Description
list
Danger of fatal electric shock.
Switch off and secure the power supply to the
charging station. Only then unplug the cable from
the vehicle.
4
Installation and electrical
connection
DANGER
Observe the safety information provided here Safety.
To access further documents use one of the following
options:
Webasto Service app (for installation)
To download this app:
scan the QR code below or
u
u
go to:
https://apps.apple.com/ (Apple App Store) or
https://play.google.com/ (Google Play Store) as ap-
propriate.
To use the Webasto Service App and access online
Webasto technical documentation, please scan the QR
code or the barcode on your Webasto product box.
You can find our operating instructions on the Webasto
website at:
https://charging.webasto.com/int/products/
documentation
All languages can be found in the download portal on
our website.
EN
15

Publicidad

loading