Kichler 56 ICON Manual De Instrucciones página 10

HANGING THE FAN (continued)
Cross pin
Hanger ball
Step 8. Slip the coupling cover, canopy cover and canopy onto the
downrod. (Fig. 10)
Supply wires & Safety cable
Set screw
Downrod
Thread the hanger ball onto the downrod, insert the cross pin
through the downrod and tighten. Tighten the set screw.
Canopy
Step 9. Lift the motor assembly into position and place the
hanger ball into the ceiling mounting bracket.
Canopy cover
Rotate the entire assembly until the "Check Tab" has dropped into
Coupling cover
the "Registration Slot" and seats firmly. (Fig. 11)
The entire motor assembly should not rotate (left or right) when
Coupling
seated properly.
WARNING: Failure to reattach the cross pin and seat the
"Check Tab" can cause the fan to fall from the ceiling during
operation. Take special care to make sure this pin is reattached.
Fig. 10
Registration
slot
Check
tab
Fig. 11
10
| KICHLER.COM