Button Instructions - Kichler 56 ICON Manual De Instrucciones

BUTTON INSTRUCTIONS

Speed Buttons
Figure 25
Buttons 1, 2, 3, 4, 5 and 6 are used to set the blade speed as follows:
1 = Low Speed
2 = Medium Low Speed
3 = Medium Speed
4 = Medium High Speed
5 = High Speed Fig. 25
6 = Extra High Speed
Figure 26
Motor Off Button
The "MOTOR OFF" button:
This button turns the fan motor off and is also used in the program procedure.
The "LIGHT CONTROL " button:
This button turns the bottom light ON or OFF and also controls the brightness
setting. Press and hold either button to set the desired brightness level. The
next time you turn the light on, the system will remember this setting. Press
and release either button to turn the light ON or OFF.
Light Control Buttons
Fig. 26
Figure 27
The "FORWARD/REVERSE " button is used to set the fan in forward or reverse
operation. Each time you press this button the fan blades will reverse direction.
Forward/Reverse
This button functions ONLY when the fan blades are in motion.
Button
OPERATIONAL NOTE: Each time you start the blades rotating, at any speed
or reverse, the direction of the blades the Control System will do a "Self Check"
to ensure operational integrity. The blades will rotate slowly a short distance
(¼ turn), pause, change directions, rotate ¼ turn, then build up RPM'S to the
selected speed.This is a perfectly normal procedure and ensures normal
Fig. 27
operating performance
19
56" ICON |