Installing The Light Kit Fixture; Installing Glass Shade - Kichler 56 ICON Manual De Instrucciones

INSTALLING THE LIGHT KIT FIXTURE

CAUTION: "To reduce the risk of electric shock, disconnect the
electrical supply circuit to the fan before installing light kit."
Step 1. Remove the finial, and nut from the threaded nipple of the
light kit fixture assembly. (Fig. 18)
Step 2. Loosen, remove, and save the four screws on the mounting
ring, attached to the motor shaft. Connect the wire from the light
kit fixture assembly to the wire from the fan motor assembly by
connecting the molded adaptor plug together.
Step 3. Align the screw holes from the light kit pan with the screw
holes on the mounting ring of the fan motor assembly. Reinstall
and tighten the four screws previously removed in step 2 securely.
(Fig. 19)
INSTALLING THE GLASS SHADE
Raise the glass shade against the light plate and secure by tightening
the nut and finial. (Fig. 20)
16
| KICHLER.COM
Light kit pan
Nut
Finial
Fan motor assembly
Light kit pan
Screws
A
B
Nut
Fig. 18
Fig. 19
Fan motor
assembly
Light kit pan
Shade
Finial
Fig. 20