Descargar Imprimir esta página

Compex COREBELT 1.0 Manual De Instrucciones página 7

Ocultar thumbs Ver también para COREBELT 1.0:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 66
• CLEANING THE SKIN. For best results, wash and clean the skin to remove all traces of grease, and dry it,
before placing the electrodes.
• APPLICATION OF THE ELECTRODES. Apply the electrodes so that their entire surface is in contact with skin.
• POSITIONING OF ELECTRODES. Position electrodes as shown in the documentation. Compex will not be
held responsible for any consequences resulting from electrodes being positioned differently.
• MOVING ELECTRODES. Always stop the stimulator before moving or removing electrodes.
• EFFECTIVENESS OF ELECTRODES. Never use a set of adhesive electrodes for more than 15 sessions,
because the contact quality between the electrode and skin, which is essential for the user's comfort and
effective stimulation, gradually reduces.
• SKIN IRRITATION. Some people, with very sensitive skin, may experience redness under the electrodes
after a session. Generally, this redness is totally harmless and usually disappears after 10 to 20 minutes.
However, never start another stimulation session on the same area if the redness is still visible.
• BATTERY. In case of device unused with battery embedded, it is recommended to connect the device at least
once every 3 months to allow battery recharge.
EN
5

Publicidad

loading

Productos relacionados para Compex COREBELT 1.0

Este manual también es adecuado para:

Corebelt 3.0Corebelt 5.0