Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly
Step 3: Assembly of the Handlebar Unit
Step 3.1: Assembly of the Cockpit
Undo the screws on the back of the cockpit. Connect the cable protruding out of the handlebar tube (8) to the
cockpit and then fix the cockpit back onto the cockpit bracket with the screws previously undone.
Step 3.2: Assembly of the Bottle Holder
Fix bottle holder (3) using two Allen screws M5x16 (C5), two spring washers M5 (C4), two washers M5 (C2) and
two plastic washers M5 (C3) from below to the front end of the sliding bracket of the handlebars.
Step 3.3: Assembly of the Handlebars
Undo the pre-assembled screws (C9) on the handlebars. Fix the handlebars (7) to the front end of the handle-
bar bracket with the previously loosened screws (C9)
C2
C1
2
11
8
C3
C9
3
C2
C4
C5
Step 4: Assembly of the Pedals
Place the pedal (10) marked R in to the thread of the right pedal arm and screw it tight by turning it in a clock-
wise direction (standard righthand thread). Then place the pedal (10) marked L in to the thread of the left pedal
arm and screw it tight by turning it in an anticlockwise direction (lefthand thread).
Please ensure that both pedals have been tightened securely to stop them coming loose whilst in use in train-
ing.
Note: Prior to assembly, you are welcome to treat the threads
of the pedals with a medium-strength thread locker,
e.g. LOCTITE® 243.
10R
10L
8
Publicidad
