Transportation, Storage, Initial Commissioning; Scope Of Delivery - Geutebruck G-ST 500+ Manual De Instrucciones

G-ST 500+

Transportation, storage, initial commissioning

Transportation and storage
The device is shipped from the factory in a shipping box with a special cush-
ion packing. This protects the device from damage during transportation.
Whenever possible, use the original device packaging.
Transportation and storage conditions
Installation instructions and initial commissioning

Scope of delivery

Ensure that the following items are included in the delivery:
Accessory box, which contains
Temperature range: -25°C to +70°C

For sub-zero operating temperature, a wide temperature HDD drive or
Solid State Disk (SSD) is required.
Relative humidity: 10% to 90% (without condensation)

The devices may only be installed by qualified personnel who are

familiar with the devices.
The device may only be commissioned after it has been ensured that

all applicable safety requirements have been fulfilled.
G-ST 500+

Quick guide

Installations/recovery DVD

Drivers & Utilities DVD

Damping bracket for in-vehicle deployment

Shock-absorbing grommet

DVI-to-VGA adapter

3-pin pluggable terminal block

Key for easy-swappable HDD tray

HDD thermal pad for 2.5" HDD/SSD (if HDD is not installed)

Screw pack

8
Back to the
table of contents