Publicidad
Idiomas disponibles
Idiomas disponibles
G-ST 500+
6 On/ off control & status output
The "On/ Off Control Ctrl & Status Output" connection allows for external switch and LED in-
dicator extension. It is useful when the system is placed in a cabinet or a not easily acces-
sed location. This function is provided via a 2x5 2.0mm pitch wafer connector.
Pin#
Definition
1
2
3
Power+
4
Power-
5
6
Standby Power+ [Output] Standby power indicator, lighting up when DC
7
8
Standby Power-
9
10
NOTE
Please make sure the polarity is correct when you connect the external LED indi-
cator to the Status LED Output
7 2.5" HDD Tray Lock/ HDD Tray
G-ST 500+ supports an external 2.5" HDD via a hot-swappable tray. Designed for easy ac-
cess, the HDD tray is secured by a lock and it supports RAID modes 0/ 1 configuration
combining with internal HDD/ SSD drive for OS installation (coupled with the internal HDD).
To set up RAID, please refer to RAID Volume Configuration section in the user manual on
CDROM for details.
[Input] Remote on/off control, connecting to an external
Ctrl+
switch to turn on/off the system (polarity is negligible).
Ctrl-
[Output] System power indicator, on if system is turned
on, off if system is turned off.
[Output] Hard drive indicator, flashing when SATA hard
HDD+
drive is active.
HDD-
power is applied and system is in S5 (standby) mode.
[Output] Watchdog timer indicator, flashing when
WDT+
watchdog timer is started.
WDT-
Description
14
Back to the
table of contents
Publicidad
