Publicidad
Idiomas disponibles
Idiomas disponibles
G-ST 500+
Internal I/O Functions
In addition to I/O connectors on the front/back panel, G-ST 500+ provides other useful features
via its on-board connectors, such as mini-PCIe sockets. In this section, we'll illustrate these in-
ternal I/O functions.
Dual Mode mSATA/ mini-PCIe socket
G-ST 500+ provides a dual mode mSATA/ mini-PCIe socket that is in compliance with mini-
PCIe specification rev. 1.2.
You can install either an mSATA SSD or mini-PCIe module into this socket and the system will
automatically detect and configure it to run PCIe or SATA signals. This mini-PCIe socket is de-
signed with SIM card support. With a SIM card installed, your system can access the internet
via your network provider‟s 3G/ 4G network. For wireless (WIFI/ 3G/ 4G) communication, mul-
tiple SMA antenna apertures can be located on the front and rear panel.
WARNING
Some off-the-shelf mini-PCIe 4G modules are not compliant to standard mini-PCIe
interface. They use 1.8V I/O signals instead of standard 3.3V I/O and may have sig-
nal conflict. Please consult with Geutebrück for compatibility when in doubt!
Installing an incompatible 4G module may damage the system or the module itself
may be damaged.
23
Back to the
table of contents
Publicidad
