Geutebruck G-ST 500+ Manual De Instrucciones página 60

G-ST 500+
1 DisplayPort Connectors
The system has dual DisplayPort (DP) outputs which are digital display interfaces that mainly
connect video source and carry audio to a display device. When connecting a single DP, it can
deliver up to 4096 x 2304 resolution and each port can deliver up to 2880 x 1800 resolution
when both DPs are connected in conjunction. The system is designed to support passive DP
adapter/ cable. You can connect to other display devices using DP-to-HDMI cable or DP-to-DVI
cable.
DP-to-HDMI
The system supports triple independent display outputs in the following combination of VGA,
DVI/ HDMI and DisplayPort. To support multiple display outputs and achieve best DVI/ HDMI
output resolution in Windows, you need to install corresponding graphics driver. Please refer to
section OS Support and Driver Installation for details.
Triple Independent Display Configuration (resolution may be limited)
Active display 1
DisplayPort
DisplayPort
2 DVI/HDMI Connectors
DVI-D transmits graphics data in digital format and therefore can deliver better image quality at
high resolution. The DVI connector on the front panel can either output DVI signals or other di-
gital signals (via an adapter/ cable) depending on the display device connected.
It supports resolutions up to 1920x1200@60Hz.
The system supports triple independent display outputs in the following combination of VGA,
DVI and DisplayPort. To support multiple display outputs and achieve best DVI output resolu-
tion in Windows, you need to install corresponding graphics driver. Please refer to section OS
Support and Driver Installation for details.
Triple Independent Display Configuration (resolution may be limited)
Active display 1
DisplayPort
DisplayPort
Active display 2
DisplayPort
DVI
Active display 2
DisplayPort
DVI
11
Back to the
table of contents
DP-to-DVI
Active display 3
DVI or VGA
VGA
Active display 3
DVI or VGA
VGA