Publicidad
Idiomas disponibles
Idiomas disponibles
G-ST 500+
3 VGA-Connector
VGA connector is the most common video display connection. The VGA output supports up to
1920x1200@60Hz resolution. By default, the VGA output is set to "always-on". For users who
want to use only digital display interface (eg. DVI or DP), the VGA Output setting can be disab-
led. To disable, press F2 upon system startup, go to "Advanced > System Agent (SA) Confi-
guration > Graphics Configuration > VGA Output > [Disable].
The system supports triple independent display outputs in the following combination of VGA,
DVI/ HDMI and DisplayPort. To support multiple display outputs and achieve best DVI/ HDMI
output resolution in Windows, you need to install corresponding graphics driver.
Please refer to section OS Support and Driver Installation in the User Manual on the supplied
CDROM for details.
Triple Independent Display Configuration (resolution may be limited)
Active display 1
DisplayPort
DisplayPort
NOTE
Please make sure your VGA cable includes SDA and SCL (DDC clock and data) sig-
nals for correct communication with monitor to get resolution/timing information.
A cable without SDA/ SCL can cause blank screen on your VGA monitor due to incor-
rect resolution/timing output.
4 USB 3.0 Connectors
G-ST 500+ offers four USB 3.0 (SuperSpeed USB) ports on its front panel. By BIOS default,
these USB ports are operated in xHCI (eXtensible Host Controller Interface) mode and are com-
patible with USB 3.0, USB 2.0, USB 1.1 and USB 1.0 devices. Legacy USB support is also pro-
vided so you can use USB keyboard/mouse in DOS environment. To use USB 3.0 ports in Win-
dows environment, you need to install corresponding USB 3.0 driver.
Please refer to section "Driver Installation" in the User Manual on the supplied CDROM for
more information.
Active display 2
DisplayPort
DVI
12
Back to the
table of contents
Active display 3
DVI or VGA
VGA
Publicidad
