FVSD 2900
User instructions
NO-LOAD CYCLE FOR TRAYS WITh CONTAINER OUTSIDE OF ThE ChAMBER
Request the most suitable vacuum containers and suction device from your regular dealer.
If you work with containers that exceed the capacity of the vacuum chamber, use the dedicated
accessory.
Activate the tray cycle suitable for the type of container and press the suction device from the suction
inlet side (at the top right of the vacuum chamber), and from the container side.
INTERRUPTION OF ThE CYCLE IN PROGRESS
By pressing the
key, an acoustic signal warns that the cycle is interrupted immediately.
The bag is not sealed and the tank is decompressed.
After the unload phase the luminous indicators go back to the initial switch-on phase.
78
2.007.98 .0 - R00 - 09/2018