Publicidad
Idiomas disponibles
Idiomas disponibles
FVSD 2900
User instructions
WARNINGS REGARDING ROUTINE MAINTENANCE
The information and instructions given in this chapter are destined for all staff operating on the ma-
chine: the user and the maintenance technician.
ELEMENTARY SAFETY STANDARDS
To carry out cleaning and routine maintenance operations in safety, follow the regulations given
below:
• Disconnect the machine from the power supply mains without pulling the power supply cable.
• Do not touch the machine with bare, humid or wet hands or feet.
• Do not insert screwdrivers, kitchen instruments or other between the guards and moving parts.
It is prohibited to remove the guards and safety devices in order to carry out routine
maintenance operations. the Manufacturer declines all liability for accidents caused
due to the failure to comply with the above-mentioned obligation.
AtteNtIoN! Do not scrape the surfaces with pointed or abrasive objects!
AtteNtIoN! For any maintenance, handling, installation and cleaning operations on
the appliance, always use relevant prevention and protection devices (gloves etc.).
CLEANING ExTERNAL SURFACES
BODY FRAME
• The stainless steel external surfaces of FVSD 2900 must be cleaned using a soft cloth or sponge
with neutral detergent following the direction of the satin finish.
• It is recommended not to use stainless steel scrubbers, scrapers or abrasive, acid or aggressive
substances, which could damage the surface irreparably.
AtteNtIoN! Do not remove the serial number plates during cleaning. these supply
important information regarding the appliance for the technical after-sales service.
2.007.98 .0 - R00 - 09/2018
81
Publicidad
