Maintenance And Repairs; Disposal - Stihl TS 700 Manual De Instrucciones

Ocultar thumbs Ver también para TS 700:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Diamond abrasive wheels
Minimum outside diameter of
thrust washers:
Max. depth of cut:
Abrasive wheels (TS 800)
Outside diameter:
Max. thickness:
Bore diameter/spindle
diameter:
Tightening torque:
Composite resin abrasive wheels
Minimum outside diameter of
thrust washers:
Max. depth of cut:
Diamond abrasive wheels
Minimum outside diameter of
thrust washers:
Max. depth of cut:
TS 700, TS 800

Maintenance and Repairs

4.06 in.
(103 mm)
Users of this unit should carry out only
4.9 in.
the maintenance operations described
(125 mm)
in this manual. STIHL recommends that
other repair work be performed only by
authorized STIHL servicing dealers.
Warranty claims following repairs can be
16 in.
accepted only if the repair has been
(400 mm)
performed by an authorized STIHL
servicing dealer using genuine STIHL
0.189 in.
replacement parts.
(4.8 mm)
0.787 in.
Genuine STIHL parts can be identified
(20 mm)
by the STIHL part number, the
22 lbf ft
{ logo and, in some cases, by
(30 Nm)
the STIHL parts symbol K. The
symbol may appear alone on small
parts.
4.06 in.
(103 mm)
5.6 in.
(145 mm)
4.06 in.
(103 mm)
5.6 in.
(145 mm)

Disposal

Observe all country-specific waste
disposal rules and regulations.
STIHL products must not be thrown in
the garbage can. Take the product,
accessories and packaging to an
approved disposal site for environment-
friendly recycling.
Contact your STIHL servicing dealer for
the latest information on waste disposal.
English
49

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Ts 800

Tabla de contenido