Publicidad
Description
Intervention of the cooking chamber safety thermostat.
Oven functioning
If the oven is cooking it stops. It is possible to go from one screen to another
one, but the cooking chamber heating is off.
Resetting
After the oven has cooled down, it is necessary to reset safety thermostat (F2),
by removing the right panel of the oven.
Suggestions for the operator
Turn the oven off, check the fan rotates without any friction.
Cool down the oven and try to cook again.
If the problem persists, call the technical service.
Remarks for the technical service
Check the fan is clean and rotates correctly. Check the foreseen RPM of the fan.
Clean carefully the sensors for the detection of cooking chamber temperature.
Check the temperature on the display corresponds to the real one inside the cooking chamber.
Reset the safety thermostat, by pressing the suitable button or proceed with replacement of the part.
Description
Intervention of motor thermal protection probe.
Oven functioning
If the oven is cooking, it stops.
It's possible to move from one screen to the other one, but the rotation of the
fan (and consequently the cooking chamber heating) is off.
Resetting
After the motor cooling, the oven turns to be operative.
Suggestions for the operator
Turn the oven off, check the fan rotates without any frictions, if any remove them.
Check the cooling slits on the right hand side panel of the oven are not obstructed.
If the anomaly persists after 1 hour or it repeats, call the technical service.
Remarks for the technical service
Check the rotation of the motor shaft is free, without any friction and that the bearings are efficient.
Check the stainless steel fan is not deformed and its rotation is regular.
Check tightness of motor shaft gasket in the components compartment.
Effect an electric control of the motor, to find out eventual defects.
Description
Malfunctioning of cooking chamber temperature probe.
Oven functioning
When the oven is cooking, it suddenly stops.
It's not possible to cook without a stable temperature.
Resetting
If you want the oven to be operative again, it's necessary the probe returns to
work correctly.
Suggestions for the operator
Call the technical service.
Remarks for the technical service
Check probe connections.
If necessary, replace cooking chamber temperature probe.
19
EN
Code A020
ATTENTION!
SAFETY THERMOSTAT
INTERVENTION
SWITCH OFF THE OVEN
IT IS NECESSARY TO
RESET
THE SAFETY THERMOSTAT
IF THE MALFUNCTIONING
DOESN'T DISAPPEAR
CALL TECHNICAL SERVICE
Code A030
ATTENTION!
MOTOR FAN
PROTECTION DEVICE
INTERVENTION
SWITCH OFF THE OVEN
IF AFTER ONE HOUR
THE MALFUNCTIONING
DOESN'T DISAPPEAR
CALL TECHNICAL SERVICE
Code A040
ATTENTION!
COOKING CHAMBER
THERMOSTAT
MALFUNCTIONING
IT'S IMPOSSIBLE
TO COOK
WITHOUT A RELIABLE
TEMPERATURE
REFERENCE
Publicidad
