Publicidad
Description
After three unsuccessful attempts to reset gas it is necessary to restart the
oven to try the lighting process again. This operation helps the removal of any
residues of gas in the burners.
Oven functioning
Until the oven has been restarted it is not possible to try the lighting of the
burners again.
Resetting
By restarting the oven it is possible to try the lighting process again.
Suggestions for the operator
Call the technical service.
Remarks for the technical service
Check the efficiency and the integrity of the gas installation.
Check the proper functioning of the electrodes and electronic control units.
8.0 ADJUSTMENTS
From the home page, pressing the icon shown on the side, you
access the area dedicated to adjustments and configuration of the
oven.
On the screen visualized by the oven, you have 3 accesses:
Area for manufacturer adjustments
This area, protected by password, is reserved to the manufacturer.
Area for installer adjustments
This area, protected by password, permits the access to adjust-
ments reserved to installer.
Area for user adjustments
This area, protected by password, permits the access to adjust-
ments reserved to the user.
To access the adjustments for the user, digit 0 and press OK.
21
EN
Code A260
ATTENTION!
3 IGNITION ATTEMPTS
FAILED
TO ATTEMPT IGNITION
SWITCH THE OVEN OFF
AND ON OR
CALL THE
TECHNICAL SERVICE
Publicidad
