Publicidad
Idiomas disponibles
Idiomas disponibles
The moving parts have to be disassembled
as follows:
• Mixer: make sure the external shovel is in
the upper vertical position (Fig. 13
this position allows the disassembling of
the piece).
Disassemble the mixer, pull the handle
(Fig. 13
) until the mixer comes off; take
B
the square shaft away from its place
(Fig. 13
) and at the same time turn the
C
external end upwards. If you want to
assemble the piece follow these instruc-
tions vice versa. Line the central point of
the shaft with the peg of the moving sup-
port; then, leave the handle.
• Ring nut: (Fig. 13
(Fig. 13
): unscrew the ring nut by hand,
E
avoiding pieces falling when the ring nut
comes out of its place, in order to avoid
causing damage both to people or to the
pieces themselves.
• Archimedean screw: (Fig. 13
disassembling the ring nut and the draw-
plate, the Archimedean screw can easily be
taken off from the machine by pushing its
spiral from the internal end.
6.1 COVER AND POOL CLEANING
Eliminate the dough residue and make sure
to thoroughly clean the most remote-access
pieces: connections of the Archimedean
screw and mixer movements (Fig 14), extru-
sion sleeve, cover and pool internal parts.
Use some warm water in order to eliminate
the residual product and then rinse; dry the
surfaces with the help of blotting paper and
disinfect with a soft cloth dipped in odourless
disinfectant.
WARNING: Never use non-nutritional,
abrasive or corrosive chemicals to
clean. Also never use coarse or abrasi-
ve objects such as steel wool, abrasive
sponges and so on.
To clean machine internal and external parts:
• remove power supply plug from power
All manuals and user guides at all-guides.com
) (only
A
) and drawplate
D
): after
F
A
B
E
D
Fig. 13
Fig. 14
Fig. 15
26
C
A
Publicidad
