MACHEREY-NAGEL URYXXON Relax Manual De Instrucciones página 79

5. Analysis of test strips
5.1 How to perform a measurement
The URYXXON Relax is very easy to use. In order to start the measurement, the test strip
®
is placed on the strip holder. The instrument automatically detects a new strip and starts
the measurement. A progress bar appears, that indicates the remaining analysis time. After
30 seconds the test strip is drawn into the instrument.
Make sure to remove excess urine by blotting the test strip carefully on a lint-free cloth.
If auto mode (Chapter 9.5 "How to deactivate and activate the autostart") is deactivated,
the analysis needs to be started by pressing
After the measurement, the instrument will release the analyzed test strip which can now be
discarded. The result is displayed on the screen and is transferred via the interfaces and/or
printed according to equipment settings.
For additional information on the test strip, please read the instruction leaflet that comes with
the strips.
Urine and used test strips bare the danger of infection. Always use protective gloves
during handling and disposal. The disposal of used test strips should be performed
according to the regulations of the handling of potentially infectious material.
NOTICE
NOTICE
on the touch-screen.
CAUTION
Manual URYXXON
®
Relax EN, V 6.01 / 03.22
79