MACHEREY-NAGEL URYXXON Relax Manual De Instrucciones página 81

5.3 Measurement errors
If the display shows "Measuring Error ..." instead of a result please read the instructions in
Chapter 13 "Error Messages and Fault Clearance".
Repeat the measurement. In case of permanent errors please contact MACHEREY-NAGEL
service.
5.4 Entering the patient identification
The patient identification needs to be entered before starting the analysis. This can be done as
follows:
• Directly on the equipment: Pressing
keypad. Enter the ID using the keys. To enter characters (i. e. "Miller") press
the character entry. Repeated pressing on the same field within 0.5 seconds switches
through the characters displayed on the key. Wrong entries may be erased by pressing
.
1234567890
1 2
4 5
7 8
Display 6: Entering ID (numeric)
• Using a standard PC-keyboard: Connect the keyboard to the instrument. User inputs on
the keyboard will automatically be interpreted as patient identifications.
• Using a bar code reader: Connect the barcode reader to the instrument. Barcode readings
will automatically be interpreted as patient identifications.
After entering the patient identification start the measurement. The patient identification is
saved together with the diagnostic findings.
A new ID cannot be entered before the present analysis has been completed.
ID:
ID
3 ABC
6
9 0
Manual URYXXON
in the start menu brings up an alphanumeric
–
GHI
PQRS
Display 7: Entering ID (letter)
DANGER
Relax EN, V 6.01 / 03.22
®
to change
ABC
ID ID
ABCDEFGH
ABC DEF 123
JKL MNO
TUV -(#)
WXYZ
81