Publicidad
Idiomas disponibles
Idiomas disponibles
• Keep the product in its packaging until the time of installation.
• If the product is stored for more than 3 months: Check the general condition
of all parts monthly. If required: Recondition or renew the protective treat-
ment.
4.3 Returning the product
• Before returning the product: Get in touch with our contact address. See back
cover.
• Observe the storage conditions until such time as you return the product.
5 Product description
5.1 Brief description
The product is a mechanical actuator for use in automation technology. The lin-
ear unit is exclusively suited for centered pull and push strokes.
5.2 Identification
Name plate
On the name plate, you will find the following information:
1 2
3
4
13
12
11
Fig. 1: Name plate (sample)
1 Manufacturer logo
3 Max. axial force
5 Stroke length
7 QR code for further information
9 Max. torque
11 Max. linear speed
13 Manufactured in
Product identification
The ordered product is clearly identified by the material number.
Product identification
The ordered product is clearly identified by the material number. The material
number can be found in these locations:
• On the back side of the product.
• On the name plate.
5.3 Warning signs on the product
Sticker
Explanation
The symbol is placed near a potentially hot surface.
Hot surfaces can cause burns.
• Do not touch the surface.
• If required, take protective measures against accidental contact.
AVENTICS™ SPRA | R412028475-BAL-001-AE | English
5
6
7
10
9
8
2 Material number (MNR)
4 Material designation
6 Screw lead
8 Date of manufacture
10 Max. acceleration
12 Manufacturing plant
5.4 Product overview (sizes 32/40/63 mm)
5.4.1 Actuator
Rod-style electrical actuator (sizes 32/40/63 mm)
2
1
8
Fig. 2: Overview (sizes 32/40/63 mm)
1 Thread for end mounting
3 Coupling housing (option)
5 Coupling (option)
7 Linear unit
5.4.2 Installation accessories
Accessories for rod-style electrical actuator (size 32/40/63 mm)
2
1
9
8
7
3
Fig. 3: Accessories (for sizes 32/40/63 mm)
1 Linear unit
3 Foot mounting kit, axial
5 Bearing blocks
7 Front flange
9 Rod clevis
6
5
4
3
7
2 Protection tube
4 Motor flange (option)
6 Motor (option)
8 Push rod
3
5
6
2 Proximity sensor
4 Center trunnion mounting
6 Front trunnion mounting
8 Ball eye rod end
4
22
Publicidad
