Corghi ET 1450 Manual De Uso página 106

WARNING
The application position of the adhesive weight can be changed from 12 o'clock to 6 o'clock
by following the instructions in the "Adhesive weight application position" set-up menu.
IMPORTANT
For car wheels (CAR environment ONLY) in the ALU1 and ALU2 programmes, the un-
balance displayed by the machine on the outer side refers to the centre of gravity of
the adhesive weight in line with the shaft assembly support flange (fig. 21)
• Manually applied adhesive weights with laser device enabled (if provided)
- Select the first side to be balanced
- Turn the wheel until the central element of the corresponding position indicator lights
up together with the laser line
- Apply the indicated balancing weight in the position on the rim corresponding to 6
o'clock.
Some slight residual unbalances may remain at the end of the test spin due to the
considerable difference in shape that may be found on rims having the same rated
dimensions. Therefore modify the value and position the previously applied weights
for accurate wheel balancing.
APPLYING BALANCING WEIGHTS IN ALU1P
OR ALU2P PROGRAMMES
• Manually applied adhesive weights
1 Select the first side to be balanced
2 Turn the wheel until the central element of the corresponding position indicator lights
up
106
21
Operator's Manual ET 1450