Corghi ET 1450 Manual De Uso página 117

- press the key to change the setting:
or -d- MM to activate the display in millimetres
or -d- in to activate the display in inches
- press the key to confirm and exit.
SET UP - RIM WIDTH VISUALISATION
The machine may be set to display the rim width unit of measurement in inches or millimetres.
Proceed as follows to modify this configuration:
- Press the key.
- use the
- press the key to confirm
- use the
enabled)
- press the key to change the setting:
or -b- MM to activate the display in millimetres
or -b- in to activate the display in inches
- press the key to confirm and exit.
Operator's Manual ET 1450
MEASUREMENT UNIT
keys to search for SEt UP
keys to search for -b- in (-b- MM if the display in millimetres is
UK
117