Corghi ET 1450 Manual De Uso página 99

If the inner sensor (diameter and distance) fails to operate
- Use the keypad to enter the wheel geometric data by following the procedure described
below:
- press the key.
- measure the width of the rim using the calliper provided (Fig. 14)
- modify the width value (-b-) displayed by pressing the
desired value is set.
The displayed values can be increased or decreased quickly by keeping the keys
pressed.
The width can be set in millimetres by changing the setting of the unit of measurement
in the machine's set-up menu
- press the key to confirm the previous value and set the machine for diameter
entry (-d-)
- read the rated rim diameter value on the tyre
- modify the displayed diameter value by pressing the
read number is set
- press the key to confirm the previous value and set the machine for distance
data entry (-A-)
- bring the distance measuring arm into contact with the inner side of the rim (fig.11).
- read the value of the distance between the wheel and the casing on the rule (A, fig.15).
Operator's Manual ET 1450
keys until the
UK
keys until the
99