General Descriptions - Solter aeroprocess 4200 DV Manual De Instrucciones

GENERAL DESCRIPTIONS

Aeroprocess 4200 DV welding machines are developed to support MMA, TIG and MIG-MAG welding processes; with
a notable capacity for MIG-MAG welding with multiple combinations of materials and shielding gases. The range of
Aeroprocess 4200 DV machines, is equipped with dual digital signal processor, monitoring the status of the welding
arc up to 80,000 times per second. Thanks to this technology, the equipment it can ensure an accurate and reliable
arc under all operating conditions.
It can be applied universally to any type of welding of various materials such as stainless steels, alloy steels, alumi-
nium alloys or other copper or titanium alloys. The range of Solter Aeroprocess equipments allows rapid setting with
the assistance of synergic configuration of MIG-MAG parameters.
For MMA welding, the machine is equipped with adjustable anti-stick, hot-start and arc-force features. Thanks to
these features, you can weld effectively with any type of coated electrodes.
For TIG welding, the equipment allows Lift Arc ignition, pre and post gas timing, and end current ramp control.
For MIG-MAG welding, the equipment has 55 pre-set synergic programs. In addition, there are also available the
special features of Burn Back, Hot Start, Crater Filling, timing for spot welding and penetration assistance.
On the back of the machine there is a nameplate of the welding machine parameters. This plate is designed in accor-
dance with the EN 60974-1 Standard.
MEANING OF THE INDICATIONS ON THE SPECIFICATIONS PLATE
EN 60974
S/N....
MIG - MAG
MMA
TIG
Uo
X
I1 max.
I1 eff.
I2
U2
U1
X ph
50/60 Hz
IP XX
S
SOLTER
SOLDADURA S.L.
International Standard for welding equipment.
Serial number.
MIG - MAG welding.
MMA welding.
TIG welding.
No-load welding voltage.
Duty Cycle %.
Max. instantaneous absorbed current.
Max. effective absorbed current.
Welding current (A).
Test voltage for welding current (I2).
Supplying voltage.
Number of phases to be connected.
Frequency
IP protection class.
Suitable for working in places with increased risks.
AEROPROCESS 3